Description
Technical Bulletin
Heavy Duty Disc Cleaner-II
RXSOL-16-1007-210
INTRODUCTION:-
RXSOL-16-1007-210 is a liquid blend of organic solvent with heavy duty & concentrated emulsifying agents . An extremely effective for removal of burnt grease , carbon deposit , oily residues and lacquers found in fuel oil and lube oil purifiers and filters
FIELDS:-
A very fast & effectively removes without the need of Scrubbing and Brushing of Centrifugal Separators, Disc & all types of heavy tenacious deposits which collect in fuel & lube oils centrifugal separators disc stacks.
NOTE:- Mechanical cleaning ( Scrubbing and Brushing ) damage to discs which results in poor performance.
Procedure:-
Should be diluted ,at the rate of 1-parts RXSOL-16-1007-210 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt / contamination RXSOL-16-1007-210 may be used directly.
At 50 to 60°C for best result apply higher concentration for 15 min. to 3 hours.
After the unit or parts have been satisfactorily cleaned, they should be rinsed thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc,Tin, Galvanized surfaces or Anodized Aluminium.
NOTE:-
Recirculation and heating will improves the cleaning action.
Characteristics:-
• Formulated to remove heavy tenacious deposits.
• Allows cleaning of discs without dismantling of disc stacks.
• Reduces downtime.
• Improves efficiency of centrifuge installation.
• Cleans down to metal surfaces.
• Cleans all types of separator discs
**Read the Material Safety Data Sheet before using this product**
Label
RXSOL-16-1007 is a liquid blend of organic solvent with heavy duty & concentrated emulsifying Acidic agents , which is developed for cleaning stainless steel separator discs . An extremely effective for removal of SALT DEPOSITION ( Salts of Calcium Carbonate etc. ) burnt grease , carbon deposit , oily residues and lacquers found in fuel oil and lube oil purifiers and filters. NOTE:- Mechanical cleaning ( Scrubbing and Brushing ) damage to discs which results in poor performance.
LABEL PROPERTY
propertis
Odour …………………………………. Odourless
Appearance ………………………… Liquid, pale yellow, soluble in water
pH ………………………………………. 1.5 – 2.5 at 1 % concentration
Boiling point > ……………………. 100 °C at 760 mm /Hg
Vapour pressure ………………….. not known
Vapour density …………………….. not known
Freezing point ……………………….. <0 °C at 760 mm/Hg
Completely soluble in water
Specific gravity (water=1) ............1.15 - 1.17
Non combustible
