Description
Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. This descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time.
It does not contain toxic cresols or other tar oils that Require SARA Title III, Section 313 spill loss or disposal.
Do not use concentrated 1008 on aluminium surfaces
Uniqueness of 1008 :: —
RXSOL 1008 Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. The uniqueness of this Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.
Technical Bulletin
Descaling Liquid-Rx
(RXSOL-11-1008-020)
Liquid Acid for Removal of Scale and rust deposit
Product Description: special grade cleaner also compatible on Aluminium, Zinc, Tin, or any Galvanized Surfaces RXSOL-11-1008-020 is a liquid superior, heavy duty, concentrated acid solution containing accelerators, corrosion-inhibitors & wetting agents.Specifically formulated to remove rust and water scale build-up from boilers, evaporators, heat exchangers, cooling systems, pipeline collection systems etc.Very effective results when is applied.
Fields: Boilers ,calorifiers ,heat exchangers ,diesel engine cooling system ,condensers ,evaporators ,& other types of equipment where rust & scale forms and very compatible with soft metals.
Directions for Use and Dose Rates: The most effective method is circulation for large systems or components like boilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 10-40% of RXSOL-11-1008-020 in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale . In case of small components , the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser RXSOL OB 1005.
RXSOL-11-1008-020 should be mixed with fresh water to form a solution of 5-30%, depending on the extent of scaling. After using RXSOL-11-1008-020 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.
Chemical Cleaning Module: Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale forms.
See Rx cleansers Practical Application Manual:
Product Properties:
Appearance | Clear liquid | |
Density | In g/cm3 at 15°C: 1.2 | |
pH | (Neat) <1.5 | |
Compatibility | ||
Metal | Contains corrosion inhibitor | |
Rubber | No known effect | |
Sythetic Rubber | May swell | |
Packaging | Order No.: RXSOL-11-1008-020 | Size(litres) 25 , 35 |
Characteristics:
. Fast and effective scale remover. Very soft on ferrous metals.
. Removes water scale & rust from boilers/diesel engine & other cooling system .As well as from condensers,
evaporators, & heat exchangers etc
Label
Specifically formulated to remove rust and water scale build-up from boilers, evaporators, heat exchangers, cooling systems, pipeline collection systems etc.Very effective results when is applied.
Causes burns. Irritating to respiratory system. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice Wear suitable protective clothing. Gloves and aye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
LABEL PROPERTY
LIQUID ACID FOR REMOVING SCALE AND RUST
TRANSPORT INFORMATION:-
IMDG/ADR/DOT Class …………….. 8
Hazard class ………………………… 8
Proper Shipping Name ……………. Mixture of acid solution
UN Number …………………………… UN 1789
Hazardous Ingredient ……………. Corrosive
Packaging Group …………………… II