Description
Biocontrol RX is a specially designed liquid biocide against micro organisms contaminating fuel storage tanks and systems. These micro organisms can cause corrosion, clog filters and nozzles and degrade the properties of the fuel. Biocontrol Rx is effective in layers between water and oil where the bacteria growth is most active.
Technical Bulletin
Fuel Oil Biocide
Product description
Biocontrol Rx is a specially designed liquid biocide against micro organisms contaminating fuel storage tanks and systems. These micro organisms can cause corrosion, clog filters and nozzles and degrade the properties of the fuel. Biocontrol Rx is effective in layers between water and oil where the bacteria growth is most active.
Directions for Use
Biocontrol Rx is self dispersing and can therefore be added directly to the fuel tank. The preventive dose rate is 0.3 Itr per ton of fuel but in strongly infected fuels the dose rate should be 3 Itr per ton of fuel. In case of lube oil contamination.
Product Properties
|
APPEARANCE |
Pale yellow liquid |
|
DENSITY In g/cm3 at 15°C |
0.9 |
|
FLASH POINT (PMCC) °C |
Above 61 |
|
COMPATIBILITY |
|
|
Metal |
No known Effect |
|
Rubber |
No known effect |
|
Synthetic rubber |
No known effect |
Features, Benefits and Applications
• Kills micro organisms in fuel oil
• Keeps filters and nozzles free from clogging
• Prevents corrosion in fuel systems
• Is not harmful to metal and synthetic rubber
• Does not form corrosive combustion products
• No cases have been reported where bacteria have become immune to Biocontrol Rx.
Label
Biocontrol Rx is a specially designed liquid biocide against micro organisms contaminating fuel storage tanks and systems. These micro organisms can cause corrosion, clog filters and nozzles and degrade the properties of the fuel. Biocontrol Rx is effective in layers between water and oil where the bacteria growth is most active.
LABEL PROPERTY
Propertis
Odour …………………………….. Strong smell of amine.
Appearance ……………………. Liquid, pale yellow, partly soluble in water
pH ………………………………….. not applicable
Boiling point ……………………. 185 °C to 210 °C at 760 mm /Hg
Vapour density (air = 1) ……. 1
Melting point ……………………. not known
Partially soluble in water
Specific gravity (water=1) ….. 0.89
Flash point ……………………….. 85 deg C (CC)
Auto-ignition point ………………. 230 deg C
Lower explosive limit ………….. 0.6 % (in air)
Upper explosive limit …………… 6 % (in air)6 % (in air)
