Description
ALKAATuff High Foam CLEANER liquid always be wise decision to clean ship cargo hold. As before loading of cargo surveyor first demand is – Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.
ALKAATuff High Foam CLEANER plays very important role in hold cleaning and general digressing. It is a heavy duty non-corrosive concentrated cleaning compound soluble in fresh and salt water , also suitable with high presure cleanig machines.
Technical Bulletin
ALKAATUFF
ALKAATUFF High Foam CLEANER LIQUID – HD (RXSOL-22-3033-210)
The Importance of ALKAATUFF High Foam CLEANER by High-Pressure Cleaning
Ship marine hold cleaning chemicals
ALKAATUFF High Foam CLEANER most suitable for cargo hold and tank cleaning.
ALKAATUFF High Foam CLEANER plays very important role during ship hold cleaning, Its high foam ability increasing ALKAATUFF cleaning power on the vertical surface, As liquid product can’t sustain on the vertical surface while HIGH composite FOAM can sustain on the surface which is resulting from good cleaning effect.
Extra foaming is major features which is differentiating ALKAATUFF High Foam CLEANER to general ALKAATUFF.
ALKAATUFF High foam using procedure and cleaning method :
1st Step Cleaning of extra and excess loose particle:::
Before applying ALKAATUFF High Foam CLEANER on hold surface, Makes sure extra loose cargo particle should be removed manually or Air blown method. Then cleaning procedure can be followed either by high foam machine or Manual.
2nd step is for Mixing and dilution of ALKAATUFF High Foam CLEANER:::
If cleaning step is with HP machine ( High Pressure ), Then mix concentrated ALKAATUFF High Foam CLEANER with fresh water, it can be diluted 1 Ltrs ALKAATUFF High foam with 4 to 5 Ltrs Fresh water.
If cleaning step followed by hand spray, Then apply ALKAATUFF high foam neat on the surface. Approx 1 ltr covers 10 to 12 square meter.
3rd Step final procedure:::
Leave for about 30 – 45 minutes. The surface remains wet. Wash down with hot water at around 80 – 90 degree. Rinsing procedure can be repeated 1 to 3 times if required for Cargo Tank and Cargo Hold Cleaning.
The job of high pressure cleaning can be done easier & quicker by simply using RxTuffin correct dosages. Using a high-pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1: Spraying the ALKAATUFF High Foam CLEANER over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.
After the ALKAATUFF High Foam CLEANER has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the ALKAATUFF High Foam CLEANER thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of RxTuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of ALKAATUFF incorrect dosages is half the job done.
3 Pieces of Good Advice:
Apply ALKAATUFF High Foam CLEANER on dry surface where possible! A dry surface will absorb far better than a wet surface. When applying RxTuff on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RxTuff may produce “channels” down the surface, thereby running too fast off the surface. During high-pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with the optimum concentration of ALKAATUFF High Foam CLEANER will give the best effect.
Product Description:- ALKAATUFF High Foam CLEANER is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals. It is the low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents, Biodegradable and minimizes the extreme hazards to personnel in handling materials.
Applications:- ALKAATUFF High Foam CLEANER Suitable for cleaning engine components like fuel and Lube oil filters, Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as Decks, Tanks, Engine-rooms, etc. can be used for all types of cleaning and degreasing and may be applied by brush, handspray, high and low pressure washing machines etc.
Directions for Use and Dose Rates:
General Cleaning:- ALKAATUFF High Foam CLEANER can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination ALKAATUFF High Foam CLEANER should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of RxTuff to a bucket of water. ALKAATUFF High Foam CLEANER solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the ALKAATUFF High Foam CLEANER solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, ALKAATUFF High Foam CLEANER is not recommended for washing machines.
Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes & Soot from inert gas systems.
Method of Application and Dose Rates:-
- Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
- Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
- Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.
Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-
- Spray ALKAATUFF High Foam CLEANER on with a high-pressure cleaning machine and use 1:6 with water. If used with a hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
- Leave for about 30-45 minutes. The surface should be kept wet.
- Wash down with hot water (80°C) and check the cargo tank.
- Repeat the procedure if necessary.
Note:- Whenever possible, the cleaning solution should be heated to 60-80°C.If this method is not possible, other conventional methods such as separate rate direct injection, recirculation or hand spraying provide acceptable options.For boiler fireside cleaning, a 10-20 % hot solution, (temp. above 40°C), should be sprayed on to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary.
Product Properties:-
|
Appearance |
Pale yellow liquid |
|
|
Density |
In g/cm3 at 15°C: 1.01 |
|
|
Compatibility |
|
|
|
Metal |
No known effect |
|
|
Rubber |
No known effect |
|
|
pH |
Alkaline |
|
|
Packaging |
RXSOL-22-3033-210 |
Size (in Litres) |
|
|
|
25, 210 |
Characteristics:-
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic.
- Biodegradable.
- Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use.
- Water-based cleaner.
- ALKAATUFF High Foam CLEANER has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals.
- Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing.
- Contains wetting agents.
- Leaves surfaces residue free.
- Acceptable for use in food areas.
- Suitable for accommodation cleaning of woodwork, leather, desks, etc.
- Suitable for cleaning of toilets and showers.
- Suitable for cleaning of reefer boxes.
- Can be used for cleaning of windows and portholes.
- Can be used for cleaning of dishes.
- Can be used for cleaning of hospitals.
- Can be used for hand laundry cleaning.
Label
Very effective water soluble alkaline foam cleaner for use in hold cleaning and general degreasing action. May be applied by brush, hand spray and by high and low pressure washing machines. Never mix ALKAATUFF High Foam CLEANER with acidic based product, but this product can be mixed with alkaline materials.
For best result spot the highly contaminated area, use neat ALKAATUFF High Foam CLEANER on spotted area. After 10 – 30 Minutes follow the general cleaning operation of cargo hold.
3 Pieces of Good Advice:
A) Apply on dry surface where possible! A dry surface will absorb far better than a wet surface. B) For vertical surfaces : Start application from the bottom and work upwards! If beginning from the top and going downwards, the cleaner may produce “channels” down the surface, thereby running too fast off the surface. C) During high pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of cleaner will give the best effect.
Properties
LABEL PROPERTY
Odour ………………… Odourless
Appearance …….. Liquid, colourless to yellow, soluble in water
pH ……………………… 11.5 – 12.5 at 0.1 % concentration, pH 13 – 14 at 100 % concentration
Boiling point …………. >100 °C at 760 mm /Hg
Freezing point ………. 5 °C at 760 mm/Hg
Non combustible
