RXSOL 2000 – 20 Ltr

Unique formulation with organic Corrosion Inhibitors , Anti-Scalant for use in closed cooling water systems as a high temperature coolant for internal combustion stationers, engines, machinery, snow melting systems, industrial heat transfer fluids , for p

SKU: RXSOL-40-2000-020 Category:

Description

RXSOL 2000 20 Ltr is a unique formulation with organic Corrosion Inhibitors , Anti-Scalant for use in closed cooling water systems as a high temperature coolant for internal combustion stationers, engines, machinery, snow melting systems, industrial heat transfer fluids , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhibitor ( Protects all the metals including cast iron , mild steel , copper .

It is effective against liner pitting and cavitation erosion. It prevents over heating of engine and thus reducing chances of shut down. It is non-harmful to radiator or heater connecting hoses, diesel liner seals and ‘O’ rings.
 
Engine Radiator Corrosion protection is achieved by the film-forming ability of the corrosion inhibitor and scale suppressant to keep engines clean and free from scale, and reduce downtime and maintenance costs.
 
The product protects cooling systems against corrosion, liner pitting, cavitation-erosion, mineral scale deposits and electrolysis.

 

Technical Bulletin

DIESEL COOLING WATER  
CORROSION INHIBITOR              
RXSOL-40-2000-020

Introduction:-
RXSOL-40-2000-020 a unique formulation with organic Corrosion Inhibitors , Anti-Scalant for use in closed cooling water systems , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhibitor ( Protects all the metals including cast iron , mild steel , copper.
This product also contails Benzotriazole , which is very effective  effective corrosion inhibitor for copper and its alloys by preventing undesirable surface reactions. It is known that a passive layer, consisting of a complex between copper and benzotriazole, is formed when copper is immersed in a solution containing benzotriazole. The passive layer is insoluble in aqueous and many organic solutions. There is a positive correlation between the thickness of the passive layer and the efficiency of preventing corrosion. The exact structure of the copper-BTA complex is controversial and many proposals have been suggested.


Note:-  
The stable oxide film that is formed by RXSOL-40-2000-020 prevents corrosion caused by electrolytic action between dissimilar   metals used in the system . RXSOL-40-2000-020  has been field tested and found to have no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.                                                                                                                                                       
 

Applications-DG*Sets:-
Internal combustion engines closed circuit cooling system compressor cooling system. RXSOL-40-2000 incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.
 

Advantages: –       
 1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL-40-2000-020 is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product is accidentally overdosed, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.
2. Improves generating cooling efficiency by maintaining a clean heat transfer       
3. Corrosion protection by using superior corrosion inhibitor.
4. Reduced maintenance and down   time
5. Compatible with Coolants / Antifreeze solution / Glycol .
6. Friendly with   Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)
 

Note :- In cases where systems are contaminated with oil and/or scale they should be cleaned before starting to apply RXSOL-40-2000-020 .There are suitable RX BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL SC 2002 and descaling by using RXSOL DC 1008 .
SPECIFICATION /   HANDLING 
Color  Pink/ red (Colour changes of the product can not   be excluded the effectively will however not impaired.)

Sp. Gravity

:

 

pH 

:

 

Freezing Point

:

17 0 c

Odour

:

1.1 to 1.25

Alkaline

:

(11.3 – 11.5)

None:-
RXSOL-40-2000-020 is an alkaline product  & should  be handled like other chemical Avoid contact with Eyes, Skin ,in case of contact ,wash with copious amounts of water  immediately.

DIESEL COOLING WATER   CORROSION INHIBITOR                 
RXSOL-40-2000-020Nitrite (as PPM NO2)  0 100-200 300-600  700-900  1100-1300  1440-2400
RXSOL-40-2000-020 /1000L 13.0 11.3 8-10  5-7   1.5-3.5   0

Method Of Use:-
1. Properly   clean  the  system  with  water  and  alkaline  liquid ,  if  necessary.
2. Add  0 .15-1.5 %  of  RXSOL-40-2000-020 in system or recommended Nitrite level 1400 – 2500 ppm can be measured and controlled  by  any standard  RXSOL test  kit  for  Nitrite, Chloride  test  also helps  to detect excess  contamination  to  maintain  accepted  levels . when the product is dosed as recommended  limit By buffering action of   RXSOL-40-2000-020    , pH should be maintained between 8.3 and 10 by the treatment.
 

Note:-   

Initial dosage for an untreated system is 9 litres of RXSOL 2000 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite.  For  best  result  and  prolonged  engine  life  add  RXSOL-40-2000-020  every  500 -6500  km. or  250  to  300 hours  of  running  time  or  every  2 month   interval .

Label

RXSOL-40-2000 a unique formulation with organic Corrosion Inhibitors , Anti-Scalant for use in closed cooling water systems , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhibitor ( Protects all the metals including cast iron , mild steel , copper.
Properties

LABEL PROPERTY

Odour …………………Odourless
Appearance ………..Redis to Pink Liquid, soluble in water
pH ………………………11.3 to 11.8 at 100 % concentration
Boiling point ………….>100 °C at 760 mm /Hg
Vapour pressure……not known
Vapour density ……..not applicable
Freezing point ……….<0 °C at 760 mm/Hg Completely soluble in water Specific gravity .........(water=1) 1.1 to 1.25

WhatsApp chat