Description
Rust Remover manufacturer, supplier and exporter. Rust remover is advanced blend of various acid with additional base and inhibitor. Its powerful chemical rust removal action dissolves rust without any mechanical action. This is the reason why Rust Remover is so popular for removal of rust before painting.
Technical Bulletin
This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work.
* Cleans and brightens aluminium and copper.
* Removes rust stains without risk to paintwork.
* Safe on most common metals for Rust Removel & Passivation
Direction for use
For rust removal the surfaces to be treated should be free form loose materials, flaking paint, dirt or oil. In most cases diluted solution of RXSOL-16-1088-025 , can be applied by brush ranging from 10-50% and left to react for 5 – 40 minutes then the residues should be rinsed off thoroughly with clean water jet . Smaller objects can be soaked in plastic container. After cleaning, rinse items thoroughly with a water jet.
• For aluminium , only diluted solution up to 10 – 25% can be used and rinse with in 10- 30mins.
• For stainless Steel Disc Cleaning (never use on copper, brass or bronze parts), dilute to 4 – 10 parts water, and
immerse from 1 – 3 hours depending on the severity of the job concerned. Cleaning will be accelerated with eleva-
te4d temperatures up to 60°C and agitaion. After cleaning rinse thoroughly with clean water.
For best performance on aluminium use RXSOL Degreaser for degreasing as it has a neutral pH.
Paintwork : RXSOL-16-1011-RR-20 should be diluted with water 1:4 . Then solution can be applied
by brushing, spraying for 10 – 20 minutes the residues should be rinsed off thoroughly with high pressure water.
PHYSICAL Properties
Appearance | Clear & Colourless fLiquid |
Specific gravity (200C) | 1.21 |
Flash point cc | None |
R 34 | Causes burns. |
S 26 | On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice. |
Label
This is very effective and well balanced products to remove rust from all kinds of surface. This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of removal of rust stains.
Cleans and brightens aluminium and copper.
Removes rust stains without risk to paintwork.
Safe on most common metals for Rust Remover & Passivation. Usually it is used in a 10 to 20% solution. Smaller parts can be immersed in a plastic bath, After 20 minutes working time they can be rinsed throughly and sprayed off with a powerful water jet afterwards. If hardness contaminations remain after tankcleaning a solution of 0.5 liter per every 100 liters of water is to be injected for about 20 minutes in the automatic washing system. The advised temperature is 75 to 80 ‘C
LABEL PROPERTY
Propertis
Appearance …………. Clear liquid
pH ………………………. 10% solution 1.5-2.5
Flash Point …………….. Not applicable
Compatibility
Metal …………………….. Concentrate and long touch may corrode.
Rubber ………………….. No known effect