Description
Very effective alkaline – based cleaner for use in hold cleaning and general digressing. its heavy molecular surfactants rapidly react with water and produce effective cleaning solution. May be applied by brush, hand spray and by high and low-pressure washing machines.
It is a heavy duty non-corrosive concentrated cleaning compound soluble in fresh and salt water, also suitable for high-pressure cleaning machines. Ideal for difficult cleaning problems faced in industrial and other plants, Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc.
Technical Bulletin
RX TUFF HIGH FOAM LIQUID (RXSOL-22-3030-210 )
The Importance of Rx Tuff HF by High-Pressure Cleaning
The job of high pressure cleaning can be done easier & quicker by simply using RxTuff HF correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1: Spraying the RxTuff HF over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.
After the RxTuff has been sprayed on the surface and before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the RxTuff HF thoroughly dissolv- es the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of RxTuff substantially reduces the time required for the Cle -aning operation, as well as preventing dirt from reforming on the surface. The use of RxTuff HF in correct dosages is half the job done.
3 Pieces of Good Advice:
Apply RxTuff HF on dry surface where possible! A dry surface will absorb far better than a wet surface. When applying RxTuff on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RxTuff HF may produce “channels” down the surface, thereby running too fast off the surface. During high pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RxTuff HF will give the best effect .
Product Description:-RxTuff HF is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals . It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Applications:-RxTuff Suitable for cleaning engine components like fuel and Lube oil filters, Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as Decks, Tanks, Engine-rooms, etc. can be used for all types of cleaning and degreasing and may be applied by brush, handspray, high and low pressure washing machines etc.
Directions for Use and Dose Rates:
General Cleaning:- RxTuff HF can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination RxTuff should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of RxTuff HF to a bucket of water. RxTuff HF solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the RxTuff HF solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, RxTuff is not recommended for washing machines.
Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes & Soot from inert gas systems.
Method of Application and Dose Rates:-
- Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
- Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
- Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.
Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-
- Spray RxTuff HF on with a high pressure cleaning machine and use 1:6 with water. If used with hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
- Leave for about 30-45 minutes. The surface should be kept wet.
- Wash down with hot water (80°C) and check the cargo tank.
- Repeat the procedure if necessary.
Note:- Whenever possible, the cleaning solution should be heated to 60-80°C.If this method is not possible, other conventional methods such as separate rate direct injection, recirulation or hand spraying provide acceptable options.For boiler fire side cleaning, a 10-20 % hot solution, (temp. above 40°C), should be sprayed on to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary.
Product Properties:-
|
Appearance |
Pale yellow liquid |
|
|
Density |
In g/cm3 at 15°C: 1.01 |
|
|
Compatibility |
|
|
|
Metal |
No known effect |
|
|
Rubber |
No known effect |
|
|
pH |
Alkaline |
|
|
Packaging |
RXSOL-22-3030-210 |
Size (in Litres) |
|
|
|
25, 210 |
Characteristics:-
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic.
- Biodegradable.
- Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use.
- Water-based cleaner.
- RxTuff HF has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals.
- Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing.
- Contains wetting agents.
- Leaves surfaces residue free.
- Acceptable for use in food areas.
- Suitable for accommodation cleaning of woodwork, leather, desks, etc.
- Suitable for cleaning of toilets and showers.
- Suitable for cleaning of reefer boxes.
- Can be used for cleaning of windows and portholes.
- Can be used for cleaning of dishes.
- Can be used for cleaning of hospitals.
- Can be used for hand laundry cleaning.
Label
Ship cargo hold Cleaning ALKALINE SURFACTANT. In general AQUAATUFF Ship Hold Cleaner can be used as a multipurpose General Ship Cargo Hold cleaner.
Directions for use : Use Hand gloves, Goggle and refer MSDS before handling of AQUAATUFF Ship Hold Cleaner.
Before cleaning with AQUAATUFF Ship Hold Cleaner it is recommended to pre-wash cargo tanks with hot water 50-60 degree C.
Recommendation dose for High Pressure Machine is 1:4 with water. However, for hand sprayer, apply the AQUAATUFF Ship Hold Cleaner neat on the surfaces, allowing 1 litre per 12m2. Then wait for 30-45 minutes. The surface remains wet. If there is any possibilities to heat water then wash down with hot water (80°C) to get maximum results.
REPEAT the procedure if necessary.
To apply on vertical surface heavy FOAM can be generated by using air blown point inside the mixture of AQUAATUFF Ship Hold Cleaner and water.
LABEL PROPERTY
TIPS : Diluted AQUAATUFF Ship Hold Cleaner can be mixed with diluted COAL REMOVER, RXSOL PCS to increase detergency effect of coal remover and PCS.
Never mix AQUAATUFF Ship Hold Cleaner with Acidic Materials directly, But after dilution it can be utilized to neutralize ACIDIC MATERIAL in emergency.
STOCK POINT : GANDHIDHAM, MUMBAI, KOLKATA, VISAKHAPATNAM, GANGAVARAM, CHENNAI, ENNORE, DUBAI, FUJAIRAH.
MSDS / PROCEDURE of AQUAATUFF Ship Hold Cleaner available on this link http://rxmarine.com/AQUAATUFF Ship Hold Cleaner-LABEL
