Description
Marine clean SC is is a superior NON- CAUSTIC BASED Biodegradable cleaner which is developed for use in TANK and other systems containing aluminium and other soft metal. It is also novel blend of organic and inorganic corrosion inhibitors, including molybdate, intended to protect steel, copper and other nonferrous metals. RXSOL-20-2010-210 strong non-caustic surfactant basis Tank cleaning and degreasing Product. It is based on the latest and most powerful biodegradable Surface Active and emulsifying agents. It contains fatty alcohol etoxylates, metasilikates and complexing agents. It works well in hard, soft, ambient and hot water. It is ideal for soot removing and cleaning of extremely dirty tanks after Mineral Oils /Petroleum Products. Note. All cleaning chemicals have reduced effect with seawater.
Excellent Eco-friendly product
Suitable on all common metals & coatings
Technical Bulletin
Marine Clean SC
RXSOL-20-2010-210
Description
Marine clean SC is strong non-caustic surfactant basis Tank cleaning and degreasing Product. It is based on the latest and most powerful biodegradable surface-active and emulsifying agents. It contains fatty alcohol etoxylates, methasilikates and complexing agents. It works well in hard, soft, ambient and hot water. It is ideal for soot removing and cleaning of extremely dirty tanks after Mineral Oils/Petroleum Products. Note. All cleaning chemicals have reduced effect with seawater.
Product benefits, Application & Features:
• Non-Flammable
• Leaves no film in the cargo tanks
• Easy to apply. Effective and economical in use
• Suitable in sea & fresh water
• Contains no ethoxylated nonylphenol (NF)
• Biodegradable
Method for Application & Use
Prior to use of any chemicals, make sure the tanks and lines are well stripped and drained. A proper pre-cleaning will reduce the amount of chemicals required. Further, do not overheat as this may change the characteristic of the cargo and in some cases burn the cargo to the bulkhead. Carefully read the cargo specification.
For vegetable, animals, and fats: Tanks containing drying or semi-drying oils should be flushed or pre-washed or moisten as soon as possible after completion of discharging to prevent formation of hard tenacious residues. The temperature used for pre-cleaning will depend on whether the cargo is drying, semi-drying or non-drying, and the cargoes melting point. Thus an individual cleaning operation should be made for each cargo.
Due to the fact that the zinc is porous, a prolonged pre-cleaning with lower temperatures is highly advisable prior to introduction of chemicals on such lining.
Re-circulations:
1. Flush tanks with ambient seawater to remove remaining cargo to slop. (As per MARPOL 78/73)
2. Recycle tanks with increasing temperature for 2-8 hr, depending cargo and size of tank. This is a very important operation, as it will remove oily-mud and residues in the coating/steel.
3. Make a mixture with fresh water and 0,5 -2 % Marine clean SC. Insert the mixture into the tank and commence the re-circulation wash for 2-8 hr. Increased temperatures will improve the cleaning result. Maximum effect from chemical at 650C. Do not overheat, as this may burn the cargo.
4. Flush tanks with large amount of warm seawater (2-3 hr) to remove any residues of Chemicals.
5. Flush tanks with freshwater to remove salts, mop and dry.
Spot cleaning after most CPP / hydrocarbons.
1. Marine clean SC may be sprayed on the bulkhead neat or diluted, to areas where residues remain after tank washing, “Spot Cleaning”. A heated dilution is found to be very efficient.
2. Product should be allowed to stand for 10-30 minutes prior to re-washing areas. Do not leave the product to dry on bare coating.
3. Clean areas by flushing manually with high pressure, using fresh water, or by performing a re-circulation. For persistent deposits, agitation by scrubbing will assist the cleaning operation. Heated water will increase the cleaning effect .
Hazardous Indetification and first add Measure
|
|
|
|
|
|
|
Contact with eyes |
Corrosive to eyes, Can cause damage to the eyes |
|
Contact with skin |
Causes severe burns (R35) |
|
Inhalation |
No information available but must be considered harmful |
|
Ingestion |
Harmful if swallowed (R22) |
|
Contact with skin |
Immediately and drench affected skin with plenty of water. Then wash with soap and water Seek medical advice if necessary. |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids Obtain immediate medical attention. Continue flushing with water until medical help arrives. |
|
Ingestion |
Do not induce vomiting Never give anything by mouth to an unconscious person Give water or milk to drink Obtain immediate medical attention |
|
Inhalation |
Seek medical attention if ill effects occur |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) When in doubt or symptoms persist, seek medical attention |
Personal Safety :
|
Personal Precautions |
Wear protective clothing as per section 8. |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses. |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete Neutralise with Acid. |
|
Special Precautions |
Wear protective clothing as per section 8. |
Label
RXSOL-20-2010-210 Marine clean SC is is a superior NON- CAUSTIC BASED cleaner which is developed for use in TANK and other systems containing aluminium and other soft metal. It is also novel blend of organic and inorganic corrosion inhibitors, including molybdate, intended to protect steel, copper and other nonferrous metals. RXSOL-20-2010-210 strong non-caustic surfactant basis Tank cleaning and degreasing Product. It is based on the latest and most powerful biodegradable Surface Active and emulsifying agents. It contains fatty alcohol etoxylates, metasilikates and complexing agents. It works well in hard, soft, ambient and hot water. It is ideal for soot removing and cleaning of extremely dirty tanks after Mineral Oils/Petroleum Products. Note. All cleaning chemicals have reduced effect with seawater.
LABEL PROPERTY
Appearance ………………….Clear Amber Liquid
Odour …………………………..Neutral
Density ………………………..1,20 at 20C
Flash point ……………………None
pH 1% Solt. ………………….2 at 20C
Corrosive action :-
Metal ………..Slight action
Plastiic ………None
PROPERTIES
Blend of phosphoric acid in solution and surfactants.
ADR Class ……………………. 8
Kemle ………………………….. 80
UN. no. …………………………3264
Packing Group ……………… III
IMDG Class ………………….. 8
R34 …………………………….. Causes burns
R36/38 ……………………….. Irritating to eyes and skin.
S26 ………… In case of contact with eyes wash promptly with plenty
of water and seek medical advice.
S28 ………… In case of contact with skin, rinse immediately with
plenty of water.
