Description
Presence of Lead content in petroleum product contaminant tank for next voyage, RXSOL Lead Cleaner / Inhibitor Remover is a special and concentrated clear organic, Surfactant basis liquid compound which is very effective to clean and upgrade cargo tanks that have carried leaded gasoline, carbon tetrachloride and virgin naphtha.
RXSOL Lead Cleaner/Inhibitor Remover contains hydrocarbon acids, which has an excellent property to bind lead-ions and keep them in solutions.
Technical Bulletin
Discription and Application :
RXSOL Lead Cleaner / Inhibitor Remover is a clear organic, Surfactant basis liquid compound specially designed to clean and upgrade cargo tanks that have carried leaded gasoline, carbon tetrachloride and virgin naphtha.
RXSOL Lead Cleaner/Inhibitor Remover contains hydrocarbon acids, which has an excellent property to bind lead-ions and keep them in solutions.
RXSOL Lead Cleaner/Inhibitor Remover provides a fast, efficient and inexpensive method to remove lead and chlorides from the pores of zinc silicate , epoxy based coated tank surfaces or stain steel Tank.
Procedure of Use
Method – 1
- After discharging wash the tanks with warm sea water approx. 50 °C through butter wash Machines.
- Ventilate tanks till “gas free”
- Spray tanks with our undiluted Rxsol Lead Cleaner/Inhibitor Remover by spray gun and leave to soak for approx. 30 minutes.
- 1 ltr of Rxsol Lead Cleaner/ Inhibitor Remover will clean 5 to 7 square meters of tank surface.
- Start recirculation by butter worthing with warm water (preferable fresh) at 50°C through Machines for approx. 2 hours also through lines and manifold.
- Finish tank washing by flushing with fresh water
- Tanks to be mopped and dried.
Method – 2
- After discharging wash tanks with warm sea water approx 50ºC through butter wash machines .
- Make solution 3 to 5% with Rxsol Lead Cleaner / Inhibitor Remover and warm sea water approx 60 to 70ºC and start recirculation by butter Worthing approx 2 hours also through lines and manifold
- Finish Tank cleaning by flushing with fresh water our sea water. Tanks be mopped and dried.
Technical Specification :
|
PH |
: |
6-7 |
|
Apperance |
: |
Clear Liquid |
|
Specific Gravity |
: |
1:0 |
|
Cold stability |
: |
10°C |
|
Solubility in Water |
: |
100% Soluble |
Safety Precaution :
• avoid contact with eyes
• avoid contact with skin
• in case of irritation rinse with plenty of water
This material is biodegradable quickly. The total of the organic substances contained in the product reach, if finely dispersed, at least 60% BOD28/COD in the closed bottle test or at least 70% DOC removal in the modified OECD Screening test. (OECD-limits for classification “readily biodegradable”: at least 60% BOD28/COD resp. at least 70% DOC.)
Label
Presence of Lead content in petroleum product contaminent tank for next voyage, Rxsol Lead Cleaner / Inhibitor Remover is a speacial and concentrated clear organic, Surfactant basis liquid compound which is very effective to clean and upgrade cargo tanks that have carried leaded gasoline, carbon tetrachloride and virgin naphtha.
Rxsol Lead Cleaner/Inhibitor Remover contains hydrocarbon acids, which has an excellent property to bind lead-ions and keep them in solutions.
LABEL PROPERTY
General Information
Form …………………………….. Fluid
Colour ………………………….. Clear
Odour …………………………… Characteristic
• Change in condition
Melting point/Melting range .. Undetermined.
Boiling point/Boiling range …. 171°C
• Ignition temperature ……….. 240°C
• Self-igniting …………………… Product is not selfigniting.
• Danger of explosion ………. Product does not present an explosion hazard.
• Explosion limits
Lower ……………………………. 1.1 Vol %
Upper …………………………….. 10.6 Vol %
• Vapour pressure at 20°C .. 23 hPa
• Density at 20°C …………….. 1.01 g/cm³
• Solubility in / Miscibility with
water ……………………………… Fully miscible.
• pH-value at 20°C ……………. > 7
