Description
Hold Block Remover is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for oily stains and residues, or in combination with RXSOL Hold Block Remover as a barrier remover.RXSOL Hold Block Remover is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination with RXSOL Hold Block Remover as a barrier remover.
Technical Bulletin
DISCRIPTION:
RXSOL Hold Block Remover is a versatile all-purpose marine cleaning solution. It can be used as a powerful stand alone cleaner for oily stains and residues, or in combination with RXSOL HOLD WASH CONC. as a barrier remover.RXSOL Hold Block Remover is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for oily stains and reduces or in combination with Rxsol hold wash as a barrier remover.
MIXING INSTRUCTIONS
Fill a clean empty drum half way with FRESH water. Add required pails of Rxsol Hold Wash Concentrate (see dilution rates). Mix Well. Top up with water, stirring occasionally.
DILUTION RATES
Heavy-Duty Cleaner 1:1.5
3 Pails / Drum (75 ltrs:125 ltrs water) Coal, Petcoke, Concentrates, etc
General Cleaning 1:4
(50 ltrs:170 ltrs water) Hold Maintenance, Engine Room, etc
APPLICATION INSTRUCTIONS:::HEAVY-DUTY CLEANER
Instructions for cleaning oily residues (Coal, Petcoke, Concentrates, etc), whether or not Rxsol Hold Block was used as a barrier before loading.
1. After discharge, remove as much remaining cargo as possible, as per normal procedures.
2. Do NOT wet surface before applying Hold Wash.
3. Mix 75 Ltrs of Rxsol Hold Wash Concentrate with approx 125 Ltrs of fresh water, as per Mixing Instructions.
4. Apply Rxsol Hold Wash liberally to affected areas with a low-pressure application system.
5. Allow to soak for about 5 minutes. DO NOT ALLOW TO DRY.
6. Use a fire hose or high-pressure Machine to clean the area. Use the highest pressure possible Water.
7. Some brushing and/or scrubbing may be required for stains.
BARRIER REMOVAL
Instructions for removing Hold Block Slip Barrier Coat after discharging non-oily cargos (Sulphur, Salt, etc)
1. After discharge, remove as much remaining cargo as possible, as per normal procedures.
2. Rinse down bulkheads with high-pressure water and Let dry.
3. Mix 3 pails of Rxsol Hold Wash Concentrate with approx. 170 Ltrs of fresh water, as per Mixing Instructions.
4. Apply Rxsol Hold Wash liberally to affected areas with a low-pressure application system.
5. Allow to soak for about 5 minutes. DO NOT ALLOW TO DRY.
6. Use a firehose or high-pressure Machine to clean the area. Use the highest pressure possible water.
GENERAL CLEANING
Instructions for general hold maintenance and light-duty cleaning (engine room, crew’s locker, kitchen, crane pedestals, etc.)
1. Mix 2 pails of Rxsol Hold Wash Concentrate with approx. 170 Ltrs of fresh water, as per Mixing Instructions. For small areas, simply dilute 1:4 in any type of container.
2. Apply Rxsol Hold Wash liberally to affected areas.
3. Allow to soak for about 5 minutes. DO NOT ALLOW TO DRY.
4. Rinse clean with water.
HOW LONG TO SOAK?
5 minutes is only the suggested time. More time may be required for heavier residues. Determine the size of sections to clean and the soaking time by the current weather conditions. Clean small section in warm climates. In cooler temperatures, when drying time can be longer, clean larger sections. Do NOT allow Rxsol Hold Wash to dry. If it does, then simply reapply.
PRECAUTIONS
Although Rxsol Hold Wash is safe to use, it may cause skin or eye irritation with prolonged contact. As a precaution, wear protective gloves, goggles and a mask. Do not spray directly onto skin or eyes. Avoid prolonged breathing of mist.
Rxsol has the wide range of chemicals for cleaning chemicals for any type of vessel Including those carrying coal petcock & related to get the cargo hold clean for the next cargo choice of suitable cleaning chemical is essential & very important when applied the chemical resident type apply as important role as a surface active agent need time to penetrate & to take outside particular from the hold surface
Label
Hold Block Remover is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for oily stains and residues, or in combination with Hold Block Remover as a barrier remover . It is is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination with Hold Block Remover as a barrier remover.
Non toxic , 100% biodegradable, Environmentally friendly, Non caustic Safe to use in occupied / covered areas , Can be diluted to suit cleaning needs
LABEL PROPERTY
Odour ……………………….. Characstic
Appearance ………………. Liquid, Clear soluble in water
pH ……………………………. 11.5
Boiling point > ………… 100 °C at 760 mm /Hg
Vapour pressure ……….. not known
Vapour density ………….. not known
Freezing point ……………. <0 °C at 760 mm/Hg
Completely soluble in water
Specific gravity (water=1) 1.0
