Description
A well balanced blend of non-chlorinated degresol ( Having super Degreasing power ) with surfactants which eliminates Quick evaporation rate and resulting for Cleaningand Degreasing of electrical equipment.It provides immediate and efficient removal with a high evaporation rate.
Excellent Cleaner for Electric Parts
Electrosol (NON FLAMMABLE )
Technical Bulletin
Excellent Cleaner for Electric Parts
Electrosol (NON FLAMMABLE )
RXSOL-16-1076-025
Introduction :-
A well balanced blend of non-chlorinated degresol ( Having super Degreasing power ) with surfactants which eliminates Quick evaporation rate and resulting for Cleaningand Degreasing of electrical equipment.It provides immediate and efficient removal with a high evaporation rate.
Procedure of Use :-
RXSOL-16-1076-025 must be used in open or sufficiently ventilated areas. RXSOL-16-1076-025 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1076-025 . Never use RXSOL-16-1076-025 on a running generator or motor.
RXSOL-16-1076-025 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
| Product Properties | ||
| Appearance | Clear Colourless Liquid | Vapor Density : Heavier than air |
| Flash point | 63°C (Closed Cup) | Stability : Very stable understandard, normalconditions |
| Compatibility | ||
|
Metal Plastic Rubber |
No known effect No Known effect May swell |
Note: After use the product must always be well sealed in the drum. |
| PACKAGING | Order No | Size (in kgs./lts.) |
| RXSOL-16-1076-025 | 7/25 Lts |
Characteristics :-
- High dissolving and penetration action.
- Excellent degreasing and emulsification power .
- Safe on applied electrical insulation.
- Non-corrosive .It is safe to use on painted or varnished metal surfaces.
- Without chlorinated solvents.
- To be used as an alternative to conventional electric cleaners
Classification
| Description | Concentration | Product no. |
| ELECTROSOL – PLUS | 95 – 98 % | RXSOL – MC – 1009A |
| ELECTROSOL Q.D. (QUICK DRY) | 93 – 98% | RXSOL – MC – 1009B |
| ELECTROSOL – Non Flamable | 97 – 99 % | RXSOL – MC – 1009C |
Label
LABEL PROPERTY
product property;
Odour…………….. Smells of hydrocarbon
Appearance……………….. Liquid, colourless, insoluble in water
pH………………………………. not applicable
Boiling point………………………… 190 °C to 203 °C at 760 mm /Hg
Vapour pressure…………………40 Pa at 20 deg C
Vapour density…………………. (air = 1) 5.4
Freezing point……………………. unknown
Insoluble in water
Specific gravity (water=1)…………………… 0.79
Lower flammability limit……………………….. 0.6%(in air)
Upper flammability limit…………………………. 7%(in air)
Flash point………………………………… 63 deg C (CC)
Auto-ignition point >……………………….. 200 deg C at 760 mm Hg
Log Pow…………………………………………………….. 3.5 – 4.7
Viscosity………………………………….. 1.59 cST @ 25 deg C
