Biological Guard -280 Conc 20 Ltrs

Anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water side of coolings systems.

SKU: RXSOL-40-4003-020 Category:

Description

RXSOL-40-4003-020 (Fouling Preventing Liquid ) is a very effective clear , yellowish green with , anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water side of coolings systems. Due to its moleculer firm foaming properties, it also acts as a corrosion inhibitor.  
COMMON NAME : BIOLOGICAL GUARD

Technical Bulletin

Fouling ( by Micro – Organism) Preventing Agent

BiologicalGuard Liq.(RXSOL-40-4003-020)

Introduction:-
RXSOL-40-4003-020  is a very effective, amine based  dispersing cleaner   for  the control of fouling by  marine growth such as  algae, shellfish ,  mussels, barnacles and micro-organisms and fungal growth  in marine sea water  cooling systems. Because of its molecular  film forming  properties, RXSOL-40-4003-020  is also acts as a corrosion inhibitor due to its film forming property .

Procedure Of Use:-
RXSOL-40-4003-020  can be used in both static and flowing systems. It should be preferably be started  on a clean system from beginning stage since it is formulated to prevent growth rather than remove existing growth .  ( Existing Growth Can Be Clean By Using RXSOL DC 1008 / RXSOL SA 1008.) Note:- RXSOL-40-4003-020 Should Only Be Diluted  With Fresh Water.

Dosage For sea water cooling systems:-

Dose 150 – 500 ML of  RXSOL-40-4003-020   for every 100 tons of sea water flowing through the system per hour. The treatment should be applied daily when the vessel is on coastal waters. Normally  the treatment is not required when sailing deep sea .

For  ballast tanks Dose 1 litre of RXSOL-40-4003-020 per 10 tons of water prior to ballasting, followed by a monthly dose of 2 litres per 100 tons.For Trim Tanks, Oil Rig Sea Legs and Similar Systems Dose 25 litres of RXSOL-40-4003-020 per 100 tons of water.GeneralTesting for bacteria can be done with our RXSOL Dip Slide Methods( Designed to check and see anytime anywhere invisible danger Bacteria / fungus grow from Cooling / Drinking water ) which indicate the extent of the bacteriological contamination.

Characteristics:-

Properties

Appearance

Clear  yellow liquid

VERY EFFECTIVE FOR THE CONTROL MUSSELS MICRO-ORGANISMS AND BIOLOGICAL GROWTH. 

Density

In g/cm3 at 1 5°C: 1.17

Liquid treatment which is easy to use.

Flash Point

Compatibility

Metal

Above 75°C

 

No known effect

Maintains heat transfer in systems . Reduces maintenance and down time.    BIODEGRADABLE  .

Rubber

No known effect

NOT suitable for drinking water.

Packaging

RXSOL-40-4003-020, 25 Ltr

No danger to marine life when used as recommended. 

Characteristic sulfur odour  

Label

RXSOL-40-4003-020 (Fouling Preventing Liquid ) is a very effective clear , yellowish green with , anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water side of coolings systems. Due to its moleculer firm foaming properties, it also acts as a corrosion inhibitor.  
 

LABEL PROPERTY

Odour……………… Unpleasant odour, Strong smell of phenol
Appearance…………………. Liquid, brown, dispersible in water
pH 10…………………………. 11 (5% in 50/50 H2O-IPA mix)
Boiling point &gt…………………. 100 °C at 760 mm /Hg
Vapour pressure…………………… not known
Vapour density………………………… (air = 1) >01
Freezing point……………………………. <0 °C at 760 mm/Hg Insoluble in water Specific gravity............................. (water=1) 1.02 Flash point &gt..................... 70 deg C (CC)

WhatsApp chat