Antiscalant / Antifoulant – Corrosion Inhibitor 704

Antiscalant / Antifoulant – Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems

SKU: RXSOL-33-3337-025 Category:

Description

Antiscalant / Antifoulant – Corrosion Inhibitor 704 is a highly effective liquid antiscalant / antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with RXSOL Coagulant. It is imperative that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.

Technical Bulletin

Description :

Antiscalant / Antifoulant – Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with RXSOL Coagulant. It is imperative that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.

Application :

For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing.For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. 

Dose :

Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:

 

Temperature  Maximum Dilution %
<30°C 10
30 – 35°C 25
>35°C 50

Important Note: Over and under-dosing may cause membrane fouling so please contact Rx Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions.

Future & Benefit

  • Excellent results as a replacement for softenerfilters
  • Compatible with SoliSep* MPT150 coagulant
  • Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.
  • Compatible with all of the leading RO membranes
  •  Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants
  • Effective over a wide pH range
  • May be fed neat or diluted
  • Compatible with feedwaters that contain aluminum and iron oxides

Handling : 
 
Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.

Storage  : Store in a cool, dry place out of direct sunlight. Keep only in the original container.

Label

LABEL PROPERTY

WhatsApp chat