Description
ALKAATUFF HOLD CLEAN Very effective Emulsifier detergent based alkaline cleaner for use in hold cleaning and general degreasing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washing machines.
It is a strong water based alkaline cleaner primarily designed to provide numerous cleaning applications including:
• Cleaning of vegetable oils, animal oils, fatty acids, fish oils, grease, waxes, oil, sludge soot, carbon deposits and general dirt and grime.
• Cleaning of inert gas soot in cargo tanks.
• Cargo hold cleaning after coal and pet coke.
Technical Bulletin
ALKAATUFF HOLD CLEANING ALKALINE DETERGENT LIQUID – HD (RXSOL-22-3030-210)
The Importance of AQUA Tuff by High-Pressure Cleaning
The job of high pressure cleaning can be done easier & quicker by simply using RxTuffin correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1: Spraying the ALKAATUFF HOLD CLEANING ALKALINE DETERGENT over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.
After the ALKAATUFF HOLD CLEANING ALKALINE DETERGENT has been sprayed on the surface and before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the RxTuff thoroughly dissolv- es the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of ALKAATUFF HOLD CLEANING ALKALINE DETERGENT substantially reduces the time required for the Cle -aning operation, as well as preventing dirt from reforming on the surface. The use of ALKAATUFF HOLD CLEANING ALKALINE DETERGENT in correct dosages is half the job done.
3 Pieces of Good Advice:
Apply ALKAATUFF HOLD CLEANING ALKALINE DETERGENT on dry surface where possible! A dry surface will absorb far better than a wet surface. When applying ALKAATUFF HOLD CLEANING ALKALINE DETERGENT on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RxTuff may produce “channels” down the surface, thereby running too fast off the surface. During high pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RxTuff will give the best effect .
Product Description:-ALKAATUFF HOLD CLEANING ALKALINE DETERGENT is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals . It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Applications:-ALKAATUFF HOLD CLEANING ALKALINE DETERGENT Suitable for cleaning engine components like fuel and Lube oil filters, Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as Decks, Tanks, Engine-rooms, etc. can be used for all types of cleaning and degreasing and may be applied by brush, handspray, high and low pressure washing machines etc.
Directions for Use and Dose Rates:
General Cleaning:- ALKAATUFF HOLD CLEANING ALKALINE DETERGENT can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination ALKAATUFF HOLD CLEANING ALKALINE DETERGENT should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of ALKAATUFF HOLD CLEANING ALKALINE DETERGENT to a bucket of water. ALKAATUFF HOLD CLEANING ALKALINE DETERGENT solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the ALKAATUFF HOLD CLEANING ALKALINE DETERGENT solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, ALKAATUFF HOLD CLEANING ALKALINE DETERGENT is not recommended for washing machines.
Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes & Soot from inert gas systems.
Method of Application and Dose Rates:-
- Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
- Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
- Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.
Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-
- Spray ALKAATUFF HOLD CLEANING ALKALINE DETERGENT on with a high pressure cleaning machine and use 1:6 with water. If used with hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
- Leave for about 30-45 minutes. The surface should be kept wet.
- Wash down with hot water (80°C) and check the cargo tank.
- Repeat the procedure if necessary.
Note:- Whenever possible, the cleaning solution should be heated to 60-80°C.If this method is not possible, other conventional methods such as separate rate direct injection, recirulation or hand spraying provide acceptable options.For boiler fire side cleaning, a 10-20 % hot solution, (temp. above 40°C), should be sprayed on to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary.
Product Properties:-
|
Appearance |
Pale yellow liquid |
|
|
Density |
In g/cm3 at 15°C: 1.065 |
|
|
Compatibility |
|
|
|
Metal |
No known effect |
|
|
Rubber |
No known effect |
|
|
pH |
Alkaline |
|
|
Packaging |
RXSOL-22-3030-0210 |
Size (in Litres) |
|
|
|
25, 210 |
Characteristics:-
• Conforms to IMO MEPC.1/Circ.590. February2008.
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic.
- Biodegradable.
- Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use.
- Water-based cleaner.
- ALKAATUFF HOLD CLEANING ALKALINE DETERGENT has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals.
- Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing.
- Contains wetting agents.
- Leaves surfaces residue free.
- Acceptable for use in food areas.
- Suitable for accommodation cleaning of woodwork, leather, desks, etc.
- Suitable for cleaning of toilets and showers.
- Suitable for cleaning of reefer boxes.
- Can be used for cleaning of windows and portholes.
- Can be used for cleaning of dishes.
- Can be used for cleaning of hospitals.
- Can be used for hand laundry cleaning.
- Leaves no white stripes/ deposits on tank surfaces after washing with hot solution.
- Very powerful alkaline cleaner based on strong anionic surfaces active agents and alkaline salts.
- Cleans vegetable oils, animal oils, fish oils, greases, waxes, oil, sludge, soot carbon deposits and general dirt and grime by thorough saponification.
- Very efficient for removing inert gas soot (IGS) residues from cargo tanks.
- Contains no hydrocarbon solvents.
- Safe to used on epoxy coating, polyurethane coatings and in stainless steel tanks
- Does not contain nonyl phenol ethoxylates or other estrogenic compounds.
- Has excellent deodorizing properties, removing odours of aromatic solvents, fish oil residues .
- Biodegradable.
Label
ALKAATUFF HOLD CLEAN HOLD CLEANING ALKALINE DETERGENT Very effective water – based cleaner for use in hold cleaning and general digressing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washing machines.
Properties
LABEL PROPERTY
Propertis
Odour ………………… Odourless
Appearance ……….. Liquid, colourless to yellow, soluble in water
pH ……………………… 11.5 – 12.5 at 0.1 % concentration, pH 13 – 14 at 100 % concentration
Boiling point …………. >100 °C at 760 mm /Hg
Vapour pressure ….. not known
Vapour density …….. not applicable
Freezing point ………. 5 °C at 760 mm/Hg
Completely soluble in water
Specific gravity (water=1)…..1.23
Non combustible
