ALKAATUFF DETERGENT

It is a strong water based alkaline cleaner primarily designed to provide numerous cleaning applications including hold cleaning and general degreasing

SKU: RXSOL-22-3030-050 Category:

Description

ALKAATUFF DETERGENT Very effective Emulsifier – based alkaline ship hold cleaner. Specialized fo for pet coke, coal hold cleaning and general digressing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution. May be applied by brush, hand spray and by high and low-pressure washing machines.
 

Technical Bulletin

ALKAATUFF DETERGENT LIQUID – HD (RXSOL-22-3030-025)

The Importance of Rx Tuff by High-Pressure Cleaning

The job of high pressure cleaning can be done easier & quicker by simply using RxTuffin correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not  achieve  optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard  surfaces, such  as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1:  Spraying the  ALKAATUFF DETERGENT over the area to be cleaned.
Step 2:   Washing down the area using a high-pressure water jet.

After the RxTuff has been  sprayed on the surface and  before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the ALKAATUFF DETERGENT thoroughly dissolv- es the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of ALKAATUFF DETERGENT substantially reduces the time required for the Cle -aning operation, as well as preventing dirt from reforming on the surface. The use of ALKAATUFF DETERGENT in correct dosages is half the job done.

3 Pieces of Good Advice:
Apply  ALKAATUFF DETERGENT on dry surface where possible! A dry surface will absorb far better than a wet surface. When applying RxTuff on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the ALKAATUFF DETERGENT may produce “channels” down the surface, thereby running too fast off the surface. During high pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of ALKAATUFF DETERGENT will give the best effect .

Product Description:-ALKAATUFF DETERGENT is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of   metals . It is low toxic product with an exceptional solvency power on soil & oily  matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .

Applications:-ALKAATUFF DETERGENT Suitable for cleaning engine components like fuel and  Lube oil filters, Injection nozzles, pump components, inlet  and  exhaust valves &  primarily refers to cleaning of  hard surfaces, such as Decks, Tanks, Engine-rooms,  etc. can be used for all  types of cleaning and degreasing and  may be applied by brush, handspray, high and low pressure washing machines etc.

Directions for Use and Dose Rates:
General Cleaning:- ALKAATUFF DETERGENT can be used for all types of cleaning &  degreasing & may  be applied by  Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and  thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If  the cleaning  solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination ALKAATUFF DETERGENT should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of RxTuff to a bucket of water. ALKAATUFF DETERGENT solution can  be applied  simply by mops, brushes or rags, or by dipping the soiled articles into  the RxTuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, ALKAATUFF DETERGENT is not recommended for washing machines.                        

Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes  &  Soot from inert gas systems.

Method of Application and Dose Rates:-

  • Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
  • Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
  • Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.

Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-

  • Spray ALKAATUFF DETERGENT  on with a high pressure cleaning machine and  use 1:6 with water. If used with hand sprayer, spray  the product  neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
  • Leave for about 30-45 minutes. The surface should be kept wet.
  • Wash down with hot water (80°C) and check the cargo tank.
  • Repeat the procedure if necessary.

Note:- Whenever possible, the cleaning solution should be heated to 60-80°C.If this method is not possible, other conventional methods such as separate rate direct injection, recirulation   or hand spraying provide acceptable options.For boiler  fire  side  cleaning, a 10-20 % hot  solution, (temp. above 40°C),  should   be  sprayed on  to  the surfaces to be cleaned. Allow to  penetrate for 20 minutes and flush off. For deposits  which are very hard to remove, increase the concentration to 50% and repeat if necessary.

Product Properties:- 

Appearance

Pale yellow liquid

 

Density

In g/cm3 at 15°C: 1.065

 

Compatibility

 

 

Metal

No known effect

 

Rubber

No known effect

 

pH

Alkaline

 

Packaging

RXSOL-22-3030-025

Size (in Litres)

 

 

25, 210

Characteristics:-

•    Conforms to IMO MEPC.1/Circ.590. February2008.

  • Removes grease, oil, carbon deposits, soil and grime.
  • Keeps loosened deposits in suspension preventing re-deposition.
  • Low toxic.
  • Biodegradable.
  • Non-flammable.
  • Free from hydrocarbon solvents.
  • Effective and economical in use.
  • Water-based cleaner.
  • ALKAATUFF DETERGENT has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
  • Non-corrosive to ferrous metals.
  • Suitable for all tank-coatings.
  • Can be used for gas and hydrocarbon freeing of tanks.
  • Can be used for deodorizing.
  • Contains wetting agents.
  • Leaves surfaces residue free.                  
  • Acceptable for use in food areas.
  • Suitable for accommodation cleaning of woodwork, leather, desks, etc.
  • Suitable for cleaning of toilets and showers.
  • Suitable for cleaning of reefer boxes.
  • Can be used for cleaning of windows and portholes.
  • Can be used for cleaning of dishes.
  • Can be used for cleaning of hospitals.
  • Can be used for hand laundry cleaning.
  • Leaves no white stripes/ deposits on tank surfaces after washing with hot solution.
  • Very powerful alkaline cleaner based on strong anionic surfaces active agents and alkaline salts.
  • Cleans vegetable oils, animal oils, fish oils, greases, waxes, oil, sludge, soot carbon deposits and general dirt and grime by thorough saponification.
  • Very efficient for removing inert gas soot (IGS) residues from cargo tanks.
  • Contains no hydrocarbon solvents.
  • Safe to used on epoxy coating, polyurethane coatings and in stainless steel tanks
  • Does not contain nonyl phenol ethoxylates or other estrogenic compounds.
  • Has excellent deodorizing properties, removing odours of aromatic solvents, fish oil residues .
  • Biodegradable.

Label

Ship cargo hold Cleaning ALKALINE SURFACTANT. In general ALKAATUFF DETERGENT can be used as a multipurpose General Ship Cargo Hold cleaner.

Directions for use : Use Hand gloves, Goggle and refer MSDS before handling of ALKAATUFF DETERGENT.
Before cleaning with ALKAATUFF DETERGENT it is recommended to pre-wash cargo tanks with hot water 50-60 degree C.

The recommended dose for a High-Pressure Machine is 1:4 with water. However, for the hand sprayer, apply the ALKAATUFF DETERGENT neat on the surfaces, allowing 1 litre per 12m2. Then wait for 30-45 minutes. The surface remains wet. If there is any possibilities to heat water then wash down with hot water (80°C) to get maximum results.

REPEAT the procedure if necessary.

To apply on vertical surface heavy FOAM can be generated by using air blown point inside the mixture of ALKAATUFF DETERGENT and water.

LABEL PROPERTY

TIPS : Diluted ALKAATUFF DETERGENT can be mixed with diluted COAL REMOVER, RXSOL PCS to increase the detergency effect of coal remover and PCS.

Never mix ALKAATUFF DETERGENT with Acidic Materials directly, But after dilution, it can be utilized to neutralize ACIDIC MATERIAL in an emergency.

STOCK POINT : GANDHIDHAM, MUMBAI, KOLKATA, VISAKHAPATNAM, GANGAVARAM, CHENNAI, ENNORE, DUBAI, FUJAIRAH.

MSDS / PROCEDURE of ALKAATUFF Ship Hold Cleaner available on this link http://rxmarine.com/ALKAATUFF Ship Hold Cleaner-LABEL

WhatsApp chat