Description
Pickling Paste Green is used for cleaning and passivating of welding joints and the heat affected zone (HAZ) in welded stainless steel constructions. It is based on a unique recepie in which the concentration of Weak acid is only about 15% of the level of most pickling products.
Technical Bulletin
Description :
Pickling Paste Green is used for cleaning and passivating of welding joints and the heat affected zone (HAZ) in welded stainless steel constructions. It is based on a unique recepie in which the concentration of Weak acid is only about 15% of the level of most pickling products.
Application :
Pickling Paste Green has excellent adhesion and can be applied on vertical surfaces and ceilings without any risk of running or drying. This is due to the paste’s gel-like (thixotropic) consistency.Pickling Paste Green has a distinctive green color, making it easier to see where it has been applied. RXSOL’s pickling paste is economical to use, as only a thin film of the pickling paste is required for perfect result.
Usage Method and Doges :
- The paste is applied with a brush. After pickling and rinsing with water (high pressure) the corrosion resistance is restored in the welded area.
- The pickling times, which are dependent on temperature, type of steel and welding method vary between 45–240 minutes at room temperature.
- Working temperature +5 to +40ºC (+41 to +104ºF).
- Rinsing is done with water (high pressure).
- The pickling should as far as possible be done indoors in well ventilated rooms at room temperature. At outside work the construction is to be shielded from direct sunlight and rain.
- There are instructions for use and safety precautions on each pack.
Pickling Paste Green Technical Product data
|
Form |
: |
Viscous, green, gel-like solution with weak odour |
|
Density |
: |
1.30 kg/l |
|
Packaging |
: |
Plastic bottles of 1, 2 or 5 kg |
|
Consumption |
: |
1 kg of pickling paste is enough for approximately 120 m (393 ft) of weld bead or a surface of approximately 6 m2 (64.58 ft2) |
Label
Pickling Paste Green is used for cleaning and passivating of welding joints and the heat affected zone (HAZ) in welded stainless steel constructions. It is based on a unique recepie in which the concentration of Weak acid is only about 15% of the level of most pickling products.
LABEL PROPERTY
The paste is applied with a brush. After pickling and rinsing with water (high pressure) the corrosion resistance is restored in the welded area.
The pickling times, which are dependent on temperature, type of steel and welding method vary between 45–240 minutes at room temperature.
Working temperature +5 to +40ºC (+41 to +104ºF).
Rinsing is done with water (high pressure).
The pickling should as far as possible be done indoors in well ventilated rooms at room temperature. At outside work the construction is to be shielded from direct sunlight and rain.
There are instructions for use and safety precautions on each pack.
