Corrosion Inhibitor for metal RUST Preventive

Finished bearings can be dipped in Corrosion Inhibitor for metal RUST Prevantive to displace water-based metalworking fluids and provide corrosion protection of the highly finished parts during wrapped shipment.

SKU: RXSOL-16-1027-020 Category:

Description

Corrosion Inhibitor for metal RUST Preventive is a general purpose solvent based corrosion preventive. It is an organic rust inhibitor, which has water displacing properties and is a fingerprint neutralizer. The protective coating is thin, transparent, clear and slightly oily.

Application or immersion type dewatering and protective fluid.

Technical Bulletin

Nitrite , Mercaptobenzothiazole (MBT) ,Metasilicate as a Aluminium protector , Borate

DESCRIPTION:
Corrosion Inhibitor for metal RUST Prevantive is a general purpose solvent based corrosion preventative. It is an organic rust inhibitor, which has water displacing properties and is a fingerprint neutralizer. The protective coating is thin, transparent, clear and slightly oily.

APPLICATION:
Corrosion Inhibitor for metal RUST Prevantive  protects all ferrous and non-ferrous metals during processing, indoor storage and wrapped shipment (up to 12 months).

Corrosion Inhibitor for metal RUST Prevantive  is a “natural” for the bearing industry. Finished bearings can be dipped in Corrosion Inhibitor for metal RUST Prevantive   to displace water-based metalworking fluids and provide corrosion protection of the highly finished parts during wrapped shipment. It can also be used for automotive parts and other precision and semi-precision parts.

DOSE : 

RECOMMENDED STARTING DILUTIONS
Corrosion Inhibitor for metal RUST Preventive  is to be used as is. Add no other materials to dilute the concentration unless approved by  RX Marine International technical team.

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES:

Physical State : Liquid
Solubility in Water : Insoluble
Boiling Point : >190°F
Flash Point, COC : 190°F
Total Chlorine/Chloride, wt% : 0.00/0.00ppm
Appearance and Odor : Opaque/Chemical
Specific Gravity : 0.82
VOC Content (ASTM D2369) : 58%
pH Concentrate : NA
Total Sulfur, wt% : 0.00

FEATURES & BENEFITS

VERSATILE:
Corrosion Inhibitor for metal RUST Preventive   rapidly displaces water from metal surfaces leaving a continuous polar protective film between the metal and water.

Corrosion Inhibitor for metal RUST Preventive  is applied with in-process spray or dip tank application where fluid run-off is collected for reuse; water will settle quickly to the bottom of the rust preventative reservoir. The water can then be drained periodically from the bottom. 

Corrosion Inhibitor for metal RUST Preventive  can be applied to wet or dry parts. It neutralizes fingerprint residues and protects ferrous and non-ferrous metals from corrosion.

HANDLING AND STORAGE:
If frozen, thaw completely at room temperature prior to use. Inside storage is recommended. 

Label

Corrosion Inhibitor for metal RUST Preventive is a “natural” for the bearing industry. Finished bearings can be dipped in Corrosion Inhibitor for metal RUST Prevantive to displace water-based metalworking fluids and provide corrosion protection of the highly finished parts during wrapped shipment. It can also be used for automotive parts and other precision and semi-precision parts.

LABEL PROPERTY

Product Properties
Boiling Point ……………………………………………………….for component) 315.0 F (157.2 C) @ 760 mmHg
Vapor Pressure …………………………………………………. for component) 2.000 mmHg @ 68.00 F
Liquid Density …………………………………………………… 7.420 lbs/gal @ 60.00 F .891 kg/l @ 15.60 C
Volitile Organic Compounds (VOC) ……………………… (Maximum) 3.150 lbs/gal
Evaporation Rate ………………………………………………. SLOWER THAN ETHYL ETHER
State ……………………………………………………………….. LIQUID

WhatsApp chat